Hustlers Crib
EN
EspañolEnglishFrançaisDeutsch

How can we help you?

Search for your problem or choose a topic. First time? Start with the installation guide.

Install the extension

Where is "Developer mode"? I can't find it

Open a new tab and type exactly chrome://extensions in the address bar (not in Google). The switch is top right in Chrome, bottom left in Edge (edge://extensions) and top right in Brave (brave://extensions).

If the switch is grey and can't be turned on, see the question about "work or school computer".

It says "Manifest file is missing"

You chose the wrong folder. When you click "Load unpacked" you have to choose the folder that has the manifest.json file inside it.

  1. Open the folder you unzipped.
  2. If there's only another folder inside, go into it: that's the right one.
  3. Click "Load unpacked" again and choose that inner folder.

Choosing the .zip file without unzipping it doesn't work either.

I can't unzip the ZIP or can't find the downloaded file

The file is usually in your Downloads folder. Press Ctrl + J in the browser to see your downloads and click "Show in folder".

To unzip on Windows: right-click → "Extract all…" → "Extract". On Mac: double-click the ZIP. If Windows warns that the file may be dangerous, it's because it comes from the Internet: only download it from your dashboard on our website.

I can't see the "Load unpacked" button

That button only appears when "Developer mode" is on. Turn it on in chrome://extensions and you'll see three new buttons at the top left: "Load unpacked", "Pack extension" and "Update". In Edge it's called "Load unpacked".

Work or school computer: "Your administrator has blocked it"

On company, school or university computers the administrator often blocks developer mode or extensions. There's no safe way around that block: use your personal computer or ask the IT manager for permission.

Does it work on phones or tablets?

The extension needs a computer (Windows, Mac or Linux) with Chrome, Edge or Brave: mobile browsers don't support extensions.

What you can do from your phone is go into your dashboard to create products, upload photos, see sales and mark items as sold. Then you publish from your computer in a minute.

Does it work on Safari, Firefox or Opera?

For now it works on Google Chrome, Microsoft Edge and Brave (recent versions). Safari and Firefox aren't supported yet. If you use another browser, you can install Chrome just for publishing: your marketplaces work the same.

The extension has disappeared or its card shows "Error"

It's almost always because the extension's folder has been deleted, moved or renamed (for example when emptying Downloads).

  1. Download the ZIP again from your dashboard → Extension.
  2. Unzip it into a permanent folder, such as Documents.
  3. In chrome://extensions remove the old extension and click "Load unpacked" again.
  4. You'll have to paste the address and a new connection code again.
When I open Chrome it asks whether I want to disable developer mode extensions

Some versions of Chrome show that notice at startup because the extension doesn't come from the store. Click "Cancel" or close the notice to keep using it. If you disabled it by mistake, go back to chrome://extensions and turn its switch on.

How do I update the extension to the latest version?
  1. Download the new ZIP from your dashboard → Extension.
  2. Unzip it and replace the files in the old folder with the new ones (same folder).
  3. In chrome://extensions click the reload icon (the circular arrow) on the card.

That way you won't lose the connection to your account. Then reload the tabs of your dashboard and of any marketplaces you have open. We announce new versions in News.

I can't see the extension icon in the toolbar

Click the puzzle icon (top right of the browser) and then the pin next to the extension. From there you can also open its Settings: right-click the icon → "Options".

Connect to your account

It says "Invalid token" or "wrong connection code"

The code was copied incorrectly or has been deleted.

  1. In your dashboard → Extension, click "Generate connection code".
  2. Click "Copy" (don't copy it by hand: it has 48 letters and numbers).
  3. In the extension's Settings, delete the old code, paste the new one and click "Connect".

Each code is shown only once. If you delete a connection in your dashboard, that extension stops working until you paste a new one.

It says "The address must start with https://" or "The dashboard didn't return a valid response"

In Your site address paste exactly the address shown in your dashboard → Extension ("Copy" button), with https:// at the start and nothing after it such as /index.php or /login.

If you type it by hand, check there are no extra spaces or letters.

The browser asks me for permissions. Is it safe?

Yes. The extension asks for permission for two things:

  • Our website, to read your products and save the links to your listings.
  • Your marketplaces (Vinted, eBay…), to fill in the form for listing an item.

It only acts in the tabs it opens itself when you click "Publish" or "Remove". It never sees or stores your passwords, and it never clicks "Publish" for you.

It says "Needs enabling" or a platform doesn't open

Each time you tick a new marketplace in the Platforms menu, the extension needs permission for it.

  1. Click the extension icon.
  2. Click "Enable platforms" and accept the permission.

If you declined the permission by mistake, click the button again: it will ask you again.

The "Publish with the extension" buttons don't appear in my dashboard
  1. Check that the extension is connected (open it: your list of platforms should appear).
  2. Reload the dashboard page (F5 key).
  3. If you've just installed or updated the extension, close and reopen the dashboard tab.
  4. Make sure the address in Settings is the same one you use to sign in to the dashboard.
It says "The extension has been updated. Reload this page"

This is normal after installing or updating the extension: tabs that were already open don't see it. Press F5 to reload the page and try again.

Publishing and removing listings

The marketplace opens but nothing gets filled in
  1. Check that you are signed in to that marketplace. If it asks you to sign in, do it as usual: the extension carries on when you reach the form.
  2. Wait a few seconds: some forms take a while to load.
  3. If it's still empty, click "Fill in again" in the extension's notice.
  4. If nothing works, the marketplace may have changed its design: use the notice's Copy buttons and let us know. We'll fix it in the next version.
It says "Listing partly filled in"

It means some fields have been filled in and others haven't (for example the category or the size). The notice tells you which ones are missing and has buttons to copy each detail. Complete them by hand and publish. Each marketplace asks for different things: see its guide in Marketplaces.

Photos don't upload or upload twice
  • The product needs at least one photo in your dashboard.
  • Use JPG or PNG photos, ideally 1000 × 1000 pixels or more: some marketplaces (such as Vestiaire Collective) reject small photos.
  • If a photo appears twice, delete it on the marketplace before publishing and let us know on which platform it happened.
  • If none upload, drag them in by hand: you can download them from the product page.
Does the extension publish on its own? Can it delete my listings?

No. The extension fills in the form, but you click the "Publish" button yourself after checking. When removing, it takes you to each listing but you delete it or mark it as sold.

We do it this way on purpose: it's safer for your accounts and avoids errors if a marketplace changes its design.

I published but the listing link doesn't appear in my dashboard

The extension detects the listing when the marketplace takes you to the page of the published listing. If you closed the tab earlier, or the platform took you to another page:

  1. Open your listing on the marketplace and copy its address.
  2. In your dashboard, open the product and paste the link on that platform.

You can also mark it as "Published" without a link.

I sold on one site. How do I remove the listing from the others?

Mark the product as sold in your dashboard, saying where it was sold. The listings on the other platforms switch to "Remove!" and the extension icon shows a number.

Click the icon → the extension opens each listing for you to delete it or mark it as sold. That way you avoid selling the same thing twice.

The category, size or condition are wrong

The extension tries to choose the category, condition, brand and size based on your product's details, but each marketplace uses different names. Always check them before publishing.

Tip: write the category in a simple, well-known way (for example "Sweatshirts", "Trainers", "Jeans") and the condition using the options in the product form.

Can my marketplace account be blocked for using the extension?

The extension doesn't publish on its own or do bulk actions: it only fills in the form as you would, and you click "Publish". Even so, each marketplace has its rules: don't publish the same item many times on the same platform and respect their terms of use.

Account, price and privacy

How much does it cost?

Right now the website and the extension are free while we are in beta. The website is funded by ads. If we ever add paid features, the current ones will stay free and we'll let you know beforehand in News.

Which marketplaces does it work on?

It now fills in listings on Vinted, Wallapop, Milanuncios, eBay, Facebook Marketplace, Depop, Vestiaire Collective and on your own Shopify store. See what gets filled in on each one in Marketplaces.

You can also add other websites in the Platforms menu to keep track of where you have each product.

I've forgotten my password

On the Sign in screen click "Forgot your password?" and type your email. You'll get a link to create a new one (check your spam folder too).

What data do you store? Do you see my Vinted or eBay passwords?

We store your email, your products and photos, and the links to your listings. We never see or store your marketplace passwords: you sign in to them directly. More details in the privacy policy.

My problem isn't here. How do I contact you?

Write to us via contact telling us: which browser you use, on which marketplace it happens, what message appears and, if you can, a screenshot. We reply as soon as possible.

Can't find the answer?

Ask the assistant or write to us and a person will reply.

mbargunoriba@gmail.com

Hustlers Crib assistantInstallation, connection and publishing